The setup has been completed successfully. Step 21 - Once connected the Map Screen will open and you should be receiving corrections. Step 25 - Select a desired Mountpoint from the Sourcetable. Step 24 - You will be prompted to choose Request Sourcetable. Step 22 - Enter the Ntrip Settings for your Corrections Service. Set the Link Device to Data Collector Internet then choose Setup. Step 21 - The Link Configure menu will open. Step 20 - You should now see your instrument in the list.
#FIELD GENIUS GENERIC GPS BLUETOOTH#
Pick on Bluetooth Device List to search for the GS16 / GS18 Step 17 - Pick Model and Communication and modify the settings to match below. Step 16 - Select the newly created Profile and choose Edit. Choose GNSS Rover > Add, to create a profile for the GS18. Step 15 - After opening or starting a new project you will enter the Instrument Selection menu. FieldGenius 10.0 was used in this example. Step 13 - Select Use the following IP addresses and enter the IP address 192.168.253.1, and 255.255.255.0 under the Subnet mask. Step 12 - Select the Internet Protocol Version 4 (TCP/IPv4) then pick Properties. Step 10 - Under active networks choose Bluetooth Network Connection. Step 9 - Open the Windows Control Panel (Can be found from the Window Start Menu or searching in the Device and Printers window in the previous step). Step 8 - A small window should display Connection successful. Tap to select and long hold on the device to bring up more options and choose Connect using > Ad hoc network. Step 7 - In the Devices and Printers window find the GS16 / GS18 Bluetooth Device (matching the name in Step 2). You can also open this Window from the Control Panel Step 6 - In the Settings window choose Connected Devices from the options on the left, then pick Devices and Printers. Step 5 - Go back into your Bluetooth settings and check in the list that the GS16 / GS18 is paired Total Station and GPS functions are available on a common and easy to use. Powerful alignment staking tools help you stake your points along your alignment with confidence. Step 4 - Find and Select the Instrument in the list to connect and enter a Pin if necessary FieldGenius roading allows you to manually input or import your alignment data including centerline,vertical and template data. Step 2 - Select Add BlueTooth or other device Step 1 - Select the Windows Bluetooth Icon in the Task Tray. If the SIM card is installed into the GNSS reciever this method is not required. Note, this only applies if data collector internet (SIM card in the data collector) is being used to receive the corrections from the corrections service.
#FIELD GENIUS GENERIC GPS HOW TO#
This guide explains how to establish a PAN connection using Windows 10 and FieldGenius 10 installed on a Getac tablet. Posted by How Li on 17 January 2019 10:34 AMĪ PAN (Personal Area Network) connection is used when connecting connecting the tablet version FieldGenius to a Leica GS16 / GS18 GPS.